Tool to convert most image formats to pokemon mini sprite and tile data. Output images can have from 2 up to 6 shades. The tool can also process animated GIFs.
Output format is either C header file or raw binary data (to use with assembler).
Flash utility for PokeCard 512 Rev2. Supports MrBlinkys menu to create multirom images. This is a console application without user interface.
Updated version includes support for SST39VF040 flash memory and the PokeFlash GUI is also included within the ZIP file.
The driver for Rev2 USB linker cable can be downloaded here.
Release date: December 29, 2006
Source included (Old format)
Read and display content of the internal EEPROM
Release date: December 22, 2005
Source included (Old format)
One of many p0p’s soft p0rn 😛
Animation makes appearance on SHizZLE demo
This will dump the Pokemon Mini 4kb Bios (0x0-0x1000) by sending it to the PC via rs232 serial communication.
To wire your PM to your PC just open the PM and search for 2 pads labeled with TXD and RXD on the PM board close to the IR diode/receiver. Just solder a wire to the pad that is next to the IR diodes and solder this wire to pin 2 of a standard 9 pin serial connector. Then solder a wire to GND (-) of your pokemon mini battery holder and connect this wire to pin 5 of the serial connector. That’s it!
Now just flash the ROM to a flash cart, start the PC app (it only receives everything on the serial port and writes it to a file) and then turn your PM on. The transfer is just running at 1200 baud so it will take a little while after everything is transfered.
I found out that every PM Bios is the same. The Bios included in Pokemon Channel is just the same as the Bios on an EU or US Pokemon Mini.
