Page 1 of 1

[FOR SALE] 3D Printed cartridge Shell

Posted: May 21st, 2019, 20:38
by kingsoldier
I’m selling 1 3D printed shell for the flashcard.
I ordered multiple ones for myself for trial and error, but don’t need them all.
You get it just as seen on the picture. You need to trim and sand it yourself.
Price is €7, worldwide shipping included.
Pm if you’re interested.

Image
Image

Re: [FOR SALE] 3D Printed cartridge Shell

Posted: May 22nd, 2019, 01:50
by RazorLeafAttack
Can we see pics with a DITTO mini PCB set in it, and closed? Just to see the fit and how the clearance for the plug looks.

Thanks!

Re: [FOR SALE] 3D Printed cartridge Shell

Posted: May 22nd, 2019, 19:03
by kingsoldier
It’s not a perfect sollution, but it gets the job done, at least, it worked for me.

Here’s mine:https://imgur.com/a/3Y7cEOv

Re: [FOR SALE] 3D Printed cartridge Shell

Posted: May 22nd, 2019, 22:05
by Sprinter
@ kingsoldier

thank you for helping getting my Shell design to the people, as long as you sell it for cost price i'm Ok with it.

If you did some changes please be so nice to upload the remix to thingiverse: https://www.thingiverse.com/thing:3592237


What brings me to some questions regarding your Printouts:

In the first picture with the upper back view, did you use the latest version? The left corner is standing out quite a bit more than in my currently used Shell.

On the following pictures the side walls a broken of, is this by purpose or is a consequence of different tolerances in your printout?

greetings
Ksanto

Re: [FOR SALE] 3D Printed cartridge Shell

Posted: May 25th, 2019, 23:25
by RazorLeafAttack
Sprinter, you might want to note that the model is for the DITTO mini considering it has the slot. I see that it currently says its for a Pokémon mini PCB.

Re: [FOR SALE] 3D Printed cartridge Shell

Posted: May 26th, 2019, 17:11
by Sprinter
I think that it was clear that nothing wuld play with a piece of plastic, but I have added a little "to hold". That shuld do the trick. ;)

Re: [FOR SALE] 3D Printed cartridge Shell

Posted: May 27th, 2019, 05:44
by RazorLeafAttack
Sprinter wrote:
May 26th, 2019, 17:11
I think that it was clear that nothing wuld play with a piece of plastic, but I have added a little "to hold". That shuld do the trick. ;)